Vector Platform Lifts

Vector has proven to be a design that meets the demands of today. The Vector is a platform lift, a shaft and a machine room all in one, making installation simple, without requiring any major structural alterations or drastic architectural adaptations.

The standard carrying capacity is 410kg and this can be upgraded to 500kg. Operating up to 12m high, the safety features include 'hold to run' controls and an operating speed of 0.15 m/s.

PHOTO GALLERY - Click images to enlarge

TECHNICAL SPECIFICATION

Platform length - 1480 mm
Platform width - 1000 mm (1100 mm option)
Door height - 2040 mm
Door width - 900 mm
Shaft depth - 1600 mm
Shaft width - 1375 mm (or 1475 mm with 1100mm platform)
Travel height - 250 - 13000 mm
Top height full door - 2240 mm
Optional top height half door - 1100 mm
Structural opening - 1630 x 1405 mm (or 1505 mm with 1100 mm platform)
Drive system - Self-sustaining patented screw/nut system
Rated speed - Max. 0.15 m/s
Landing control - One touch call
Platform control - Hold to run
Technical compliance - European machine directive 2006/42/EC
Rated load - 410 kg/5 persons
Number of stops - Max. 6
Number of doors - Max. 2 doors per floor
Pit - 50 mm (with ramp no pit is required)
Environment - Indoor or outdoor
Power - 3-phase 400 50Hz/5.2 A/16 A slow (single phase option)
Emergency lowering - Manual
Control supply - 24 V
Motor - 2.2 kW
Lifting capacity: 410kg - option of 500kg

Standard Specifications:

Self-closing, electrically and mechanically interlocked entrance doors
Door 2000 x 900 mm (Std.) option of half height door at the upper landing, if possible
Standard door (Type STD) with one glass panel (measurement 670 x 710 mm, height x width)
Overload signal
Obstacle protection
Emergency operation
Telephone connection on platform
Self-supporting shaft with 25mm wall panels